Pages

Monday, February 17, 2014

Another Rosette

OK for Rick's tenor I thought I would get away from the random rosette and go with an 8 piece with black purfling between the pieces and around the rosette..

Since the back and sides are Black Walnut and I have a couple of chunks of that laying around, that's what got used..

First cut some thin strips on the table saw. then cut those strips into pieces with a 22.5 deg angle on each side..


Then glue the pieces together with a 1mm strip of black purfling between each..

Glued up (fish glue)

all cleaned up
Then secure the whole thing a route out the rosette shape



Turned out pretty good, one piece came apart during the routing, but re-glued and that gets to be the part under the fingerboard extension :-)

Next Step is to route the channel into the top..


1 comment:

  1. Looks fabulous, Kerry. Love the match with the back and sides.

    ReplyDelete